What is a transient suppression diode? The basic structure, characteristics, working principle, specifications, applications, instructions for use, installation, and market prospects of transient suppression diodes 4

6、 Instructions for use:

When using TVS diodes, the following points should be noted:

1. Choose appropriate specifications: Based on the application scenario and requirements, select the appropriate TVS diode specifications, including maximum operating voltage, rated power, breakdown voltage, and response time.

2. Correct connection method: Connect the TVS diode correctly to the circuit that needs protection, usually by paralleling it to the input/output terminals of the protected component or circuit.

3. Ensure good grounding: Ensure that the TVS diode is well connected to the ground to provide an effective current loop and achieve overvoltage protection.

4. Appropriate layout and installation: When laying out and installing TVS diodes, their distance from other components should be considered to minimize the effects of inductance and capacitance.

5. Regular inspection and replacement: Regularly check the working status of TVS diodes, and if any faults or failures are found, they should be replaced in a timely manner.

7、 Installation:

The installation of TVS diodes usually follows the following steps:

1. Cleaning: Before installation, ensure that the installation area is clean, free of dust and debris.

2. Positioning: Choose a suitable location to install the TVS diode, ensuring that the distance between it and the components or circuits that need protection is as short as possible.